Home Company Radar & RF Solutions NTDS Products Support Contact

  Why X-COM?
 · About X-COM
 · Tektronix VAR
 · Product List
  RF Solutions
 · RF Software
 · RF Signal Source
 · RF Test Systems
  NTDS Solutions
 · Protocol Analyzer System
 · Matrix Switches
 · Fiber Optic Extenders
 · Test Equipment
  Contact
 · X-COM Systems
 

FX-4S

4-Channel NTDS Type E Serial Fiber Optic Extender

The FX-4S Fiber Optic Extender provides a simple means to interconnect up to four Naval Tactical Data System (NTDS) Type E Serial devices with other devices located up to 14 km apart. It provides seamless connectivity and a transparent interconnection between devices. By regenerating 100% of the incoming signal, the FX-4S ensures maximum data integrity.

As part of X-COM’s line of Commercial-Off-The-Shelf (COTS) NTDS solutions, the rackmountable FX-4S provides system managers with unprecedented design flexibility to interconnect remote equipment as if it were located in the same laboratory. The FX-4S is designed to cost-effectively meet the unique needs of today’s NTDS development, evaluation, and training environments.

Features:

  • Extended Range
    NTDS devices, other FX-4S extenders, or XPS-32 switches up to 14 km away can communicate directly via fiber optic cables
  • Flexible Fiber-Link Options
    Available in two configurations - a dedicated fiber pair per channel (four fiber pairs total) or with all four channels combined over a single fiber pair
  • Transparent
    Provides transparent, long-range, low-latency, full 10 Mbps data rate simultaneous operation
  • Clear and Accurate
    X-COM’s Suresync™ oversampling provides unmatched sensitivity and noise immunity
  • Enables Remote Configurations
    Equipment located in remote labs can be combined into new virtually co-located configurations
  • Low Maintenance
    Modular design simplifies maintenance and increases reliability
  • Reliable
    Patented signal processing algorithm and 100% signal regeneration ensures maximum data integrity in demanding environments
  • Low-Power Consumption
    Reduces heat generation, provides longer life, and increases reliability

System Design And Testing:

The FX-4S delivers performance with reliability. It is modular, reliable, simple to repair, and requires no routine maintenance. Front-panel status indicators allow for easy monitoring of link status. It has been rigorously field-tested with demonstrated bit-error rates of less than 10-10 and latency less than 500 nanoseconds.

Specifications:

Interface: MIL-STD-1397C Type E
Chassis Size: 3 ½” (2U) H x 15” D x 19” W
(19” rack mount)
Weight: Approximately 15 lbs.
Power: Standard IEC 115 VAC
Control: Front Panel, PC, or Master Switch Controller via RS-232
 
 · Product Overview
 · Features
 · System Design
 · Specifications
   
 · Print Data Sheet (450K)

 

 
 

  © 2007 X-COM Systems, LLC. All Rights Reserved.