32-Channel NTDS Type E Serial Matrix Switch

The MPS-32 Naval Tactical Data System (NTDS) Type E Serial Matrix Switch connects up to 32 MIL-STD-1397C devices. The MPS-32 provides low-latency as well as a transparent, non-blocking interconnection between any pair of devices. By regenerating 100% of the incoming signal, the MPS-32 ensures maximum data integrity.

As part of X-COM’s line of Commercial-Off-The-Shelf (COTS) NTDS solutions, the rack mountable MPS-32 offers the highest number of ports in the smallest form factor available. The MPS-32 allows NTDS networks to be rapidly reconfigured using a PC or Master Switch Controller. It is designed to cost-effectively meet the unique needs of today’s NTDS development, evaluation, and training environments.

Features:

• Powerful
  Interconnect up to 32 NTDS Type E devices in any channel-to-channel combination
  
• Low Latency
  Less than 500 ns ensures transparent communications
  
• Non-Blocking
  Simultaneous non-blocking full data rate operation on all channels
  
• Extended Range
  100% signal regeneration and active matrix circuitry mitigates adverse effects of long cables
  
• Reliable
  Very high MTBF, MTTR less than 15 min. for PCBs and power supplies; less than 30 min. for all other components
  
• Scalable
  Two, three, or four MPS-32 switches can be connected using high-speed fiber optic links to create a fully non-blocking, low-latency switching network of 64, 96, or 128 channels
  
• Flexible
  Connect NTDS devices located in up to four different physical locations into a single network
  
• Diagnostics
  Front-panel status indicators simplify operation and maintenance
  
• Low-Power Consumption
  Reduces heat generation, provides longer life, and increases reliability
  
• Upgradable
  Modular design simplifies maintenance and upgrades

System Design And Testing:

The MPS-32 delivers unmatched performance and reliability. It has been rigorously field-tested with demonstrated bit-error rates of less than 10-10 and latency less than 500 nanoseconds. The unit’s modular design consists of eight removable quad NTDS Type E line cards in groups of four and two modular power supplies. Front-panel status indicators simplify monitoring link status while low-power consumption further reduces system maintenance and increases network up-time.

Up to four MPS-32 units can be linked via fiber optic cables to create low-latency, nonblocking configurations of 64, 96, or 128 channels. The MPS-32 units can be located in a large matrix switch up to 14 km apart.

Specifications: